Precautions and application introduction of float level switch during maintenance

         You may know more or less about the maintenance of the float level switch. What should you pay attention to?
Common faults and troubleshooting of float level switch
         1. Fault phenomenon, cause analysis and troubleshooting The floating ball does not act ① The specific gravity of the liquid is less than the specific gravity of the floating ball → Reconfirm the specific gravity of the floating ball ② The floating ball leaks → Contact the company to replace the floating ball ③ Foreign matters get stuck in the floating ball → Remove foreign matters
         2. The floating ball acts, but there is no signal output ① The floating ball position is offset → Adjust the floating ball position ② The magnetic spring switch is damaged → Replace the magnetic spring switch
         3. The signal output is abnormal, and there is magnetic field interference nearby → eliminate the magnetic field
         4. The signal is kept and cannot be restored, the floating ball cannot be restored, and there is foreign matter stuck → remove the foreign matter
         5. There will be two signal outputs at one point, the buckle position will move → adjust the buckle position
         6. Clean the dirt on the connecting rod and floating ball regularly (the cycle depends on the medium).
         7. Check whether the screws on the buckle are loose.
Purpose of float level switch: applicable to various sanitary, toxic, corrosive media and explosive gas hazardous places. There are various installation forms, which are applicable to various types of containers.